Orem Foundation Pros

Piering and Underpinning in Orem, UT

Helical and push pier underpinning in Orem to stop foundation settlement, with free estimates and written scope.

Serving Orem and nearby communities.

A foundation that keeps sinking at one corner, even after a crack gets sealed, usually needs piers, not more patching. Piering and underpinning means driving steel piers down to load-bearing soil or bedrock so the structure stops moving. Orem Foundation Pros treats this as the heavier structural fix, reserved for settlement that injection alone won't hold.

Around Orem, bench-area grading and a mix of expansive clay and sandy fill is the usual reason piering gets recommended instead of a lighter repair. The soil just doesn't hold the same way block to block.

What's included

What's included with Piering and Underpinning

Typically included

Load assessment to determine how many piers and where
Excavation at each pier point along the foundation
Pier driving to confirmed load-bearing depth
Bracket attachment and load transfer, with elevation monitoring

Optional

Engineer sign-off for larger or multi-sided scopes
Interior floor leveling once the exterior lift is complete

Customer prep

Clear landscaping or fencing near the planned pier locations
Expect some yard disruption during excavation and backfill

Want a clearer scope?

Get a Free Estimate Call (435) 610-8308

How it works

How our Piering and Underpinning process works

Step 1
Load Assessment
Weight distribution across the structure determines pier placement.
Step 2
Access Excavation
Small excavation points open along the foundation perimeter.
Step 3
Pier Driving
Piers are driven or screwed to stable soil or bedrock.
Step 4
Load Transfer
Brackets connect piers to the foundation to redistribute weight.
Step 5
Leveling Adjustment
Hydraulic equipment raises the foundation toward its original position.
Step 6
Site Restoration
Excavated areas are backfilled and compacted to match grade.

Materials

Materials and methods for Piering and Underpinning

The choice between push and helical piers comes down to load and the soil at that specific point.

Steel Push Piers
Drive to depth hydraulically, built for the heavier loads typical of full-basement Orem construction.
Helical Piers
Screw in with torque control, a better fit where bench-fill soil varies within a short distance.
Underpinning Brackets
Lock piers to the existing footing so load transfers evenly instead of concentrating at one point.
Hydraulic Lift Systems
Give controlled, incremental elevation change instead of a single jarring lift.
Galvanized Coatings
Protect steel piers from corrosion over decades underground.
Compacted Fill Material
Stabilizes the soil around each new pier after installation.

Questions on materials?

Get a Free Estimate Call (435) 610-8308

FAQs

Piering and Underpinning FAQs

How long does a piering or underpinning job actually take?

A few piers at one corner typically run one to two days. A full perimeter underpinning job, especially with tight access, can stretch to a week.

Do I need a permit to install piers in Utah County?

Pier and underpinning work usually requires a structural permit, and sometimes an engineer's sign-off. Confirm scope with the city before scheduling.

How many piers does a typical Orem home need?

It depends on the extent of settlement and the load at each section. A single corner might need three to five piers; a full-wall problem needs more. An on-site assessment gives you the real number.

What does piering cost compared to crack injection?

Piering costs more per point of work because it's engineered structural support, not a surface seal. Crack injection runs a few hundred dollars; piering is typically priced per pier installed.

Can I install piers myself?

No. Load calculations, depth verification, and permit sign-off require trained judgment a homeowner can't safely replicate with rented equipment.

Will piering stop my foundation from settling further?

When piers reach genuinely stable soil or bedrock, they carry the load that was previously shifting. That's the whole point of the method.

Next step

Get a Piering and Underpinning estimate in Orem

Settlement that keeps returning after a smaller fix is a sign you need piers, not another patch. Call Orem Foundation Pros at (435) 610-8308 for a free estimate, or contact us to schedule a site visit.

Get a Free Estimate Call (435) 610-8308

Before & after

Before and after Piering and Underpinning

Before
After

Timeline

How long does piering and underpinning take?

A typical job moves from assessment to backfill within a week, longer for larger perimeters.

01
Load assessment and estimate
same day
02
Excavation
1 day
03
Pier driving and load transfer
1–3 days
04
Backfill and restoration
1 day

Need a schedule that fits?

Get a Free Estimate Call (435) 610-8308

More services

Ask about Piering and Underpinning

Tell us about the project and how to reach you.

Piering and Underpinning in Orem, UT