Orem Foundation Pros logoOrem Foundation ProsFoundation Repair · Orem, UT
Menu
foundation crack repair in Orem, UT

Orem Foundation Pros

Foundation Crack Repair in Orem, UT

Epoxy and polyurethane crack injection in Orem for basement and foundation cracks, free estimates and same-day jobs.

Serving Orem and nearby communities.

Foundation crack repair uses epoxy and polyurethane injection to seal cracks, structural or water-related, before they get worse. It's the right fix for a crack that's stable but open, or one that's actively letting water through. Orem Foundation Pros treats it as a distinct job from piering, aimed at sealing rather than correcting movement.

Orem's mix of older tract homes and newer infill construction means cracks show up for two different reasons: decades of slow settling, or faster compaction in newer fill soil. Either cause, the repair method is usually the same.

What's included

What's included with Foundation Crack Repair

Typically included

  • Crack inspection to confirm width, depth, and whether it's active
  • Injection port installation along the crack
  • Epoxy for structural bonding or polyurethane for water-stopping, depending on the crack type
  • Surface finish and a final seal check

Optional

  • Exterior grading correction if water is reaching the crack from outside
  • Pairing with wall anchors if the crack comes with visible bowing

Customer prep

  • Clear a path to the crack for inspection and injection
  • Note whether the crack has changed in width or length recently

How it works

How our Foundation Crack Repair process works

  1. Crack Inspection photo
    Step 1

    Crack Inspection

    Type, width, and cause are identified before any work begins.

  2. Surface Cleaning photo
    Step 2

    Surface Cleaning

    Debris and loose material are cleared from the crack line.

  3. Injection Port Setup photo
    Step 3

    Injection Port Setup

    Ports are set along the crack for material delivery.

  4. Sealant Injection photo
    Step 4

    Sealant Injection

    Epoxy or polyurethane fills and bonds the crack fully.

  5. Surface Finishing photo
    Step 5

    Surface Finishing

    Excess material is removed and the area smoothed.

  6. Final Inspection photo
    Step 6

    Final Inspection

    The seal is checked for a watertight, stable result.

Materials

Materials and methods for Foundation Crack Repair

Which material gets used depends on whether the crack is structural, leaking, or both.

  • Epoxy Injection Resin photo

    Epoxy Injection Resin

    Bonds structural cracks back into one solid piece, the right call for a stable crack that isn't leaking.

  • Polyurethane Foam Sealant photo

    Polyurethane Foam Sealant

    Expands to block water infiltration, a better fit for cracks dealing with spring snowmelt pressure.

  • Injection Ports photo

    Injection Ports

    Deliver sealant at controlled pressure along the full length of the crack.

  • Surface Primer photo

    Surface Primer

    Preps the concrete so the sealant actually bonds, not just sits on top.

  • Masonry Patch Compound photo

    Masonry Patch Compound

    Finishes the surface so the repair blends into the wall.

  • Protective Topcoat photo

    Protective Topcoat

    Shields the repaired crack from the moisture exposure common in Orem basements.

FAQs

Foundation Crack Repair FAQs

Is it worth fixing a foundation crack or just watching it?

A hairline crack that hasn't widened in months is fine to watch. Anything wider, growing, or letting water through is worth sealing now, before the cost of the fix grows with it.

When should I actually worry about a crack in my basement wall?

Watch for stair-stepping, a crack wider than a quarter inch, or one paired with a sticking door or window. Those point to movement, not just surface aging.

Can I just fill a foundation crack myself with epoxy from the hardware store?

A stable, non-widening hairline crack can work with a store kit. An active or widening crack tied to wall movement needs professional injection and, often, a look at the underlying cause.

How much does crack repair cost?

Most single-crack injection jobs run a few hundred to just over a thousand dollars, depending on length and material. A site visit gives you an exact number.

Do I need a permit for crack injection?

Simple crack sealing usually doesn't need a permit. If it's paired with structural wall work, that part may. Check with the city for your scope.

How long does crack repair take?

Most crack injection jobs finish in a single visit, with cure time following separately.

Next step

Get a Foundation Crack Repair estimate in Orem

If a crack is widening or letting water through, don't wait another season. Call Orem Foundation Pros at (435) 610-8308 or get a free estimate. See Wall Stabilization if the crack comes with visible wall lean.

Before & after

Before and after Foundation Crack Repair

  • foundation crack repair in Orem, UT
    Before
  • foundation crack repair in Orem, UT
    After

Timeline

How long does foundation crack repair take?

Most crack jobs are a same-day visit, start to finish.

  1. 01

    Inspection and estimate

    same day
  2. 02

    Injection and seal

    same day
  3. 03

    Cure time

    a few hours

Need a schedule that fits?

Get a Free Estimate

Ask about Foundation Crack Repair

Tell us about the project and how to reach you.

Call (435) 610-8308